AR6000 Fuel Treatments



6200
AR6200-EU Fuel Modification Complex was developed to address the shortcomings in liquid carbon based fuels. AR6200-EU utilizes the principle of catalysis for its fuel modification properties but is also a demulsifier, cleaner and fuel system protector. It successfully increases available combustion BTU through the use of a revolutionary fuel modification technology.

AR6200-EU increases the surface area of fuel droplets to increase the burn rate resulting in a more efficient use of fuel. AR6200 is engineered to lower the ignition point of fuel as much as 400º F therefore modifying the burn at a lower temperature utilizing more BTU’s and providing more energy during the combustion process. This helps eliminate black smoke with a major reduction in carbon due to a much higher burn rate. A decrease in fuel usage is realized with added horsepower and torque.

AR6200-EU has been extensively tested in the field using the EPA CMB test (the most accurate EPA test for MPG) and averaging an 8% improvement in economy. It can be used in any carbon fuel including bunker fuel, bio-fuel, pump diesel/petrol and will help maintain storage fuel integrity. It is successfully used worldwide in every type of application including consumer vehicles, fleets, power plants, ships, mining equipment and more. AR6200-EU is the only fuel treatment needed to address the major limitations inherent in fuel.

Refer to product Tech Sheet for further information.
_______________________________________________________________________________________________________________________________________

6350

 

 

AR6350 Cold Weather Protect is a concentrated cold flow technology designed to protect against waxing and plugging of fuel filters. AR6350 has been tested extensively to improve the CFPP (Cold Filter Plugging Point) of diesel and gas oils.

AR6350 is suitable for all pump diesel fuels and some bio-diesel blends. As fuels vary considerably it is recommend that the CFPP for your particular fuel is tested to achieve the desired level of protection.

Refer to product Tech Sheet for further information.

______________________________________________________________________________________________________________________________________

6400-P-series

AR6400-P MAX Polyetheramine Concentrate Professional Petrol Cleaner rapidly and safely removes gum, varnish and carbon deposits from the fuel system and engine. The active PEA combined with an effective combustion improvement catalyst also helps remove post combustion hydrocarbon build-up whilst quickly reducing harmful exhaust emissions.

AR6400-P MAX quickly restores lost engine performance and fuel economy in addition to unique properties that help lubricate and protect surfaces from further deposit build-up. Molecule by molecule deposits are safely removed from intake valves, combustion chamber, piston tops, catalytic convertor and O2 (lambda) sensors. AR6400-P MAX improves combustion efficiency and reduces the propensity for pre-ignition/pinking.

AR6400-P MAX is suitable for all 4-cycle gasoline engines, including ethanol blended fuels and biofuels. Not suitable for 2-cycle engines.

Refer to product Tech Sheet for further information.


_______________________________________________________________________________________________________________________________________

6400-P-Max-motorcycle

 

 

AR6400-P MAX Polyetheramine Concentrate Professional Petrol Cleaner For Motorcycle Engines rapidly and safely removes gum, varnish and carbon deposits from the fuel system and engine. Polyetheramine combined with an effective combustion catalyst helps remove post combustion carbon build-up whilst quickly reducing harmful exhaust emissions.

AR6400-P MAX restores lost engine performance and fuel economy. Molecule by molecule deposits are safely removed from carburettors, fuel injectors, intake valves, combustion chamber and piston tops. AR6400-P MAX improves combustion efficiency and reduces the propensity for pre-ignition/pinking.

AR6400-P MAX is suitable for all 4-cycle motorcycle engines. Not suitable for 2-cycle engines.

Refer to product Tech Sheet for further information.


_______________________________________________________________________________________________________________________________________

6400-D-Max-seriesAR6400-D MAX Professional Diesel Engine, Turbo, DPF & CAT Cleaner Concentrate A rapid improvement in engine technology has resulted in an imbalance between engine design and fuel quality. This combined with non-optimum driving conditions can result in an accumulation of deposits in the fuel system, combustion area, turbo, diesel particulate filter (DPF) and catalytic converter (CAT). These deposits effect performance, fuel economy, exhaust emissions and engine refinement.

AR6400-D MAX is a powerful next-generation all-in-one fuel system, engine, turbo, DPF and CAT cleaner. It is the culmination of years of research and the decision to combine the original AR6400-D Engine Cleaner, AR6500 DPF Cleaner and AR6600 Turbo Cleaner technologies providing the greatest value and product performance into a single treatment.

AR6400-D MAX helps restore variable geometry turbo operation and diesel particulate filter regeneration and will remove all forms of deposits from fuel injectors including carbons, varnish and stubborn lacquers.

Refer to product Tech Sheet for further information.

_______________________________________________________________________________________________________________________________________

6850-series v2

 

 

AR6850 Pure 2-Ethylhexyl Nitrate (2-EHN) Cetane Number Improver (CNI) & Lubricant AR6850 is a blend of the highest quality, pure 2-EHN and synthetic fuel lubricant.

AR6850 is suitable for raising the cetane value of all diesel and bio-diesel fuels. 2-EHN is inherently dry and energy produced by the combustion process can be lost due to internal friction in the engine between the piston rings and cylinder walls. A reduction in lubricity can also result in excess wear.

AR6850 lubricates these areas resulting in improved engine performance and protection by resolving any lubricity shortfall in the base fuel or from using 2-EHN as a cetane improver.

Refer to product Tech Sheet for further information.

_______________________________________________________________________________________________________________________________________

6900-D-Max-seriesAR6900-D MAX Advanced Fuel Synthesis AR6900-D MAX is an advanced fuel conditioner specifically designed to address inherent deficiencies in modern diesel and bio-diesel fuels. AR6900-D MAX is formulated to enhance BS EN 590 pump fuel but is also performant in all other diesel fuel types including heavy fuel oil and bio-diesel.

AR6900-D MAX has been engineered to clean, lubricate and protect the fuel system whilst enhancing combustion performance through the use of a cetane improver and Archoil’s combustion catalyst technology.

AR6900-D MAX is suitable for diesel car, van, bus, truck, agricultural, marine and rail engines including the latest Euro 6 classification or those with the latest high pressure common-rail injection fuel systems. AR6900-D MAX can reduce fuel usage, exhaust emissions and carbonaceous deposits, which help protect the catalytic converter, turbo charger and diesel particulate filter (DPF).

Refer to product Tech Sheet for further information.

_______________________________________________________________________________________________________________________________________

 

6900-P-Max-series

AR6900-P MAX Advanced Petrol Synthesis is an advanced fuel conditioner concentrate specifically designed to enhance the properties of modern petrol fuels. Utilising technology from AR6400-P, AR6900-P MAX is the first conditioner of its kind to deliver polyetheramine (PEA) to each tank of fuel with the purpose of combating carbon build-up in port and direct injection petrol engines.

Direct injection engines in particular are prone to carbon build-up on the rear of inlet valves, that is very difficult to remove with single tank fuel cleaners. However, PEA is still partly active in post combustion gases so by delivering a continuous amount of PEA it can help inhibit build-up in these areas reducing the need for invasive strip down and cleaning.

AR6900-P MAX has been engineered to clean, lubricate and protect the fuel system whilst enhancing combustion performance through the use of Archoil’s combustion catalyst technology.

AR6900-P MAX restores lost engine performance and fuel economy in addition to unique properties that help lubricate and protect surfaces from further deposit build-up. Molecule by molecule deposits are safely removed from intake valves, combustion chamber, piston tops, catalytic converter and O2 (lambda) sensors. AR6900-P MAX improves combustion efficiency and reduces the propensity for pre-ignition/pinking.

Refer to product Tech Sheet for further information. _______________________________________________________________________________________________________________________________________